acid emulsifier sl-aem01

Search Content
banner
Products Center
Acid Emulsifier

Acid Emulsifier SL-AEM01

Emulsified Acid Technology (EAT) is designed for use in carbonate acidizing and acid fracturing. It is an oil-external emulsion formed with a 70:30 hydrochloric acid-to-oil ratio, stabilized with an emulsifier SL-AEM01. 

inquire now

Product Description

EAT emulsion retards the acid reaction rate of 28% HCl approximately 10-15-fold. Even greater retardation (up to 40-fold) is achieved at lower acid concentrations.

Technical & Engineering Information

SL-AEM01 is a good surface-active agent for stabilizing acid-internal and oil-external emulsions. It is applicable at wide temperature range from 60 to 350°F(16-177℃). Typical acid-to-oil ratio for SL-AEM01 application is 70/30 by weight percentage. Higher acid-to-oil ratio will increase friction pressure and lower ratio will decrease acid strength and capacity.

SL-AEM01 is compatible with most additives in acid stimulation systems. However, additives such as non-emulsifying agents and corrosion inhibitors must be tested in the laboratory before using SL-AEM01.

Technical Indicators

Item

Indicator

Appearance

Liquid

Colour

Light Yellow

Flash Point

>= 143︒F  (62℃)

Specific Gravity

0.95~1.10(25℃)

Water Solubility

Partially Soluble

pH

6-9


Recommended Treatment

SL-AEM01 concentration depends on acid, strength, additives, oil and application temperature.

Typical concentrations range from 3 to 5 gal/1000gal of acid.

Packing and Storage

SL-AEM01 is supplied in 53gallon(200L) high density polyethylene (HDPE) drums or 265gallon(1000L) IBC. It should be stored in shaded areas with good ventilation. Keep it away from high temperature, humidity and direct sunlight.

Shelf life: 2 years.

inquire now