SL-TST01 is specifically designed to be used to prevent degradation of fracture fluids at temperatures greater than 200°F（95°C）.
Product Description
Technical & Engineering Information
Fracturing fluids will pick up oxygen either at surface or pumping down holes. The oxygen dissolved in fracturing fluids will degrade polymers presented in fluids and reduce fluid viscosity, especially at elevated temperature. SL-TST01 acts as an oxygen scavenger and prevent the rapid degradation of gelling agents caused by dissolved oxygen in fracturing fluids and improve fluid rheological properties significantly at high temperature applications (typically when bottom hole static temperature is greater than 250 ℉ (121℃)).
SL-TST01 is compatible with additives used in guar-based fracturing fluids, but it must be added in either linear gel or dissolved in water and pumped through liquid additive line. It cannot be added into crosslinker solution.
Technical Indicators
Item | Indicator |
Appearance | Liquid |
Colour | Colorless to light yellow |
Specific Gravity | 1.15-1.25 |
PH | ﹥10 |
Temperature resistance (℃) | ≥15 |
Recommended Treatment
The concentration of SL-TST01 is generally 0.01% - 0.1%. The concentration needs to be adjusted according to the different formation temperatures, different construction times, the viscosity and temperature of the fracturing fluid.
Packing and Storage
SL-TST01 is supplied in 53gallon (200L) high density polyethylene (HDPE) drums or 265gallon (1000L) IBC. Keep it away from extreme conditions such as places near flames or direct sunlight.
Shelf life: 2 years.
