SL-WGA02L is a high-yielding CMHPG slurry for continuous or batch mixing of fracturing fluids.
Fracturing fluids are pumped into the well to create conductive fractures and bypass near-wellbore damage in hydrocarbon-bearing zones. The net result is an expansion in the productive surface-area of the reservoir, compared to the unfractured formation. A series of chemical additives are selected to impart a predictable set of properties of the fluid, including viscosity, friction, formation-compatiblity, and fluid-loss control.
-
CMHPG Slurry SL-WGA02Lmore+
-
Gelling Agent SL-HVFR3622
SL-HVFR3622 is a suspension concentrate of anionic polymer in mineral oil.
more+ -
Borate Crosslinker SL-EXP3221
To improve the rheological properties of fracturing fluids, crosslinker are usually introduced into polymer-based fracturing fluids.
more+ -
Organic Zirconium Crosslinker SL-EXP4206
The high-viscosity gel used in the fracturing construction process is generally prepared from vegetable gum (guar gum) or synthetic polymer.
more+ -
Borate Crosslinker SL-EXP4601
SL-EXP4601 is an organic borate crosslinker, is suitable for water-based gel fracturing fluid system, can form high viscosity gel by crosslinking with hydroxypropyl guar gum.
more+ -
Boron Zirconium Crosslinker SL-EXP4901
Crosslinkers are generally introduced to polymer-based fracturing to improve rheological properties of the fracturing fluids. SL-EXP4901 is an organic boron zirconium composite crosslinker used for crosslinking guar-based fluids.
more+ -
Organic Zirconium Crosslinker SL-EXP6605
SL-EXP6605 is suitable for water-based gel fracturing fluid system.
more+ -
Alkaline pH buffer SL-PH01
SL-PH01 is an alkaline pH buffer, it can be used to adjust the pH range and crosslinking time required for fracturing fluid crosslinking to ensure the stability and effectiveness of fracturing fluids.
more+ -
Acidic pH buffer SL-PH02
SL-PH02 is an acidic pH buffer, can be used to adjust the pH range and crosslinking time required for fracturing fluid crosslinking to ensure the stability and effectiveness of fracturing fluids.
more+ -
Flowback Surfactant SL-EXP3201
Surface active reagents were generally used in aqueous-based stimulation fluids to lower the interfacial tension that restricts fluid flow in the rock matrix.
more+ -
Flowback Surfactant SL-K1212
SL-K1212 is mainly used in oil and gas well fracturing, acidizing and other downhole operations,
more+ -
HT Visco Elastic Surfactant SL-SurVis04
Fluid and petrol-physical heterogeneities are encountered in most sandstone and carbonate formations.
more+